Grooved Ends Butterfly Valve Fig. 21
Back to products
Wafer Type Butterfly Valve Fig. 29

Configuration options

Butterfly valve with stainless steel disc.

Butterfly valve with stress gear box.

Butterfly valve with 1 limit switch in opening.

Butterfly valve with 1 closing limit switch.

Butterfly valve with gear box and limit switch boxes.

Butterfly valve with single-phase electric actuator.

Three-phase electric actuator butterfly valve.

Butterfly valve with double-acting pneumatic actuator.

Butterfly valve with single-acting pneumatic actuator.

Wafer Type Butterfly Valve Fig. 22

– According to EN-593.
– Face to face dimensions according to EN 558-1 Serie 20. API 609.
– Valve for mounting between flanges according to UNE-EN 1092-2 PN10 / PN16.
– These valves up to Ø400 are also suitable for mounting between flanges according to ANSI Class 150 lbs.
– Top flange according to ISO 5211.
– Maximum working temperature: NBR 80 ºC. EPDM 100 ºC. and FKM (Viton ®) 200 ºC.

CHARACTERISTICS:

– Easy assembly.
– Low pressure drop and total tightness

You must be logged in to download the technical sheet

Product details

Aplications , , ,
Max. temperature , ,

Aplications

Foot valves are commonly used in ponds, swimming pools, wells and almost anywhere there is a pump.

The surface or opening of the foot valve is larger than that of the pipe, thereby minimizing pressure loss (energy dissipated due to friction along the pipe).

Description

Our butterfly valve is a wafer connection type and is sandwiched between two pipe flanges. Long bolts that run through the entire valve body connect both pipe flanges. This type of connection is suitable for sealing against bi-directional differential pressures and preventing backflow in systems designed for universal flow.

It is a very popular quarter-turn, two-way, resilient-seated valve for on-off or modulating services. It is centered (concentric) whose axis is located in the center of the disc, which is centered on the inside with respect to the X, Y axes. The tightness is optimal and it is a suitable valve for low pressure ranges. It is lightweight, takes up little installation space, has a lower cost, works quickly and is available with large hole sizes. The disc is connected to a shaft that when the valve opens the disc rotates to allow the passage of fluid and closes when the shaft rotates the disc to a position perpendicular to the direction of flow.

We have a standard construction in the small and medium passages with a manual operation lever that allows the valve to be blocked in the open or closed position and in the large passages the standard operation is with a stress gear box. Both options are inexpensive and easy to handle.

For all steps, we offer options with motorized actuators (single-phase or three-phase electric and double- or single-acting pneumatics) thanks to the fact that the upper flange that the valve has is in accordance with international standard ISO 5211, which specifies the requirements for fixing fractional actuators. return to industrial valves. These actuators are a reliable method of controlling the valve from a remote location as well as allowing large valves to be quickly actuated. Actuators can be mounted on the valve for fail-open (the valve is always open if the actuator fails), or fail-close (the valve is always closed if the actuator fails).

This butterfly valve is used for water treatment, wastewater, irrigation and in various industries and industrial applications. Not recommended for bulk solids.

IMPORTANT: Both during storage and when assembling it, the Butterfly valve must always be ajar, to avoid in the first case deformations of the elastic seat (elastomer) and during assembly to avoid tensions or forces that prevent proper centering and fastening that Do not close the valve properly.