180 ºC
Ball Valve With Flanges Fig. 65
– Face to face dimensions according to EN 558-1 Serial 27.
– Flanges dimensions and holes according UNE-EN 1092-2 PN16.
CHARACTERISTICS:
It is recommended:
– For driving and cutting service, without strangulation.
– When you need quick opening.
– For temperatures: From -10º to 180 ºC.
– When you need minimal resistance to movement.
Advantages:
– Low cost.
– It cleans by itself.
– Low maintenance.
– Does not require lubrication.
– Compact size.
Ductile “Y” type filter with Flanges PN25 Fig.42N
– Mounting length according to EN 558-1 Serie 1. DIN 3202-1 / F1.
– Flange dimensions according to UNE-EN 1092-2 PN25.
– Hole dimensions according to UNE-EN 1092-2 PN25.
OPTIONS:
– Body-lid joint in rubber, cardboard or graphite.
– Different mesh microns in sieve.
– Plugs before and after the sieve to check pressure drop.
Flanged “Y” Type Strainer (450 – 700) Fig. 42
– Face to face dimensions according to EN 558-1 Serie 1. DIN 3202-1 / F1.
– Flanges dimensions according to UNE-EN 1092-2 PN16 (From Ø15 to Ø400).
– Flanges dimensions accord. to UNE-EN 1092-2 PN10 or PN16 (From Ø.
OPTIONS:
– Body-bonnet gasket in rubber, carton or graphite.
– Available in any screen perforation.
– Plugs before and after the screen for checking drop pressure
Stainless Steel Ball Valve With Flanges Fig. 65I
– EN-12516 (DIN 3357).
– Face to face dimensions according to EN 558-1 Serie 27.
DIN 3202 F4 (From DN40 to DN100).
DIN 3202 F5 (From DN125 to DN200).
– Flanges dimensions and holes according to UNE-EN 1092-2 PN10/16.
CHARACTERISTICS:
It is recommended:
– For driving and cutting service, without strangulation.
– When you need quick opening.
– Working pressure: From 16 to 40 bar.
– Working temperature: From -25º to 180 ºC.
– When you need minimal resistance to movement.
Advantages:
– Low cost.
– It cleans by itself.
– Low maintenance.
– Does not require lubrication.
– Compact size.
Stainless Steel Double Disk Check Valve Fig. 37
– According to EN-12334.
– Face to face dimensions according to EN 558-1 Serie 16. API 609.
– Valve for mounting between flanges according to UNE-EN 1092-2 PN10 / PN16.
– These valves from Ø100 to Ø600 are also suitable for mounting between flanges according to ANSI Class 150 lbs.
CHARACTERISTICS:
– Double disk and seat design for optimum sealing.
– Springs with elongated and curved supports that offer a longer life.
– Minimal wear of the seat and disks.
– Excellent work in various mounting orientations.
– It has a low maintenance cost.
– Minimum weight and compact design, can reduce weight on the line.
– Ideal for installation in vertical pipes.
– It has an easy installation and removal.
– Eye bolt available between size Ø125 to Ø600 to facilitate the centering and
assembly of the valve.
Threaded Brass Ball Valve Fig. 60
– Threaded ends according to DIN 259 / 2999. ISO 7-1 (EN 10226-1).
CHARACTERISTICS:
It is recommended:
– For driving and cutting service, without strangulation.
– When you need quick opening.
– For temperatures: From -10º to 180 ºC.
– When you need minimal resistance to movement.
Advantages:
– Low cost.
– It cleans by itself.
– Low maintenance.
– Does not require lubrication.
– Compact size.
Threaded Ends “Y” Type Strainer Fig 43
Threaded ends according to: DIN 259 / 2999.
OPTIONS:
– Bosy-bonnet gasket in rubber, carton or graphite.
– Available in any screen perforation.
– Plugs before and after the screen for checking drop pressure.
Threaded Three Pieces Stainless Steel Ball Valve Fig. 62
– Threaded ends according to DIN 259 / 2999. ISO 7-1 (EN 10226-1).
CHARACTERISTICS:
It is recommended:
– For driving and cutting service, without strangulation.
– When you need quick opening.
– Working temperatures: From -25º to 180 ºC.
– Max. working pressure: 63
– When you need minimal resistance to movement.
Advantages:
– Low cost.
– It cleans by itself.
– Low maintenance.
– Does not require lubrication.
– Compact size.
– With lever in ISO 5211 top.
– ISO 5211 top for direct assembling to actuator.
Threaded Three Ways Stainless Steel Ball Valve Fig.61
– Threaded ends according to DIN 259 / 2999. ISO 7-1 (EN 10226-1).
OPTIONS:
– With double acting pneumatic actuator.
– With spring return pneumatic actuator.
– With monophase electric actuator.
CHARACTERISTICS:
– Three ways reduced port ball valve. – “L” ball configuration.
– FKM (Viton ®) stem o-ring.
– Anti-static device (ball-stem-body). – Locking system.
– Direct mounting actuator according to ISO 5211. – Blow-out proof stem.
– Max. working pressure: 63 bar.
– For working temperatures: From -25 oC to 180 oC.
Threaded Two Pieces Stainless Steel Ball Valve Fig. 61
– Threaded ends according to DIN 259 / 2999. ISO 7-1 (EN 10226-1).
OPTIONS:
– With lever in ISO 5211 top for direct assembling to actuator.
– With double acting pneumatic actuator.
– With spring return pneumatic actuator.
– With monophase electric actuator.
CHARACTERISTICS:
It is recommended:
– For driving and cutting service, without strangulation.
– When you need quick opening.
– For temperatures: From -10o to 180 oC.
– When you need minimal resistance to movement.
Advantages:
– Low cost.
– It cleans by itself.
– Low maintenance.
– Does not require lubrication. – Compact size.
Threaded Two Ways Brass Ball Valve With Electric/Pneumatic Actuator Fig. 63
– Threaded ends according to DIN 259 / 2999. ISO 7-1 (EN 10226-1).
CHARACTERISTICS:
It is recommended:
– For driving and cutting service, without strangulation.
– When you need quick opening.
– For temperatures: From -10º to 180 ºC.
– When you need minimal resistance to movement.
Advantages:
– Low cost.
– It cleans by itself.
– Low maintenance.
– Does not require lubrication.
– Compact size.
