Naval building
Gate Valve With NBR/EPDM Rubber Lined Wedge Fig. 50
– EN-1071.
– Face to face dimensions according to EN 558-1 Serie 14. DIN 3202 / F4.
– Flanges dimensions according to UNE-EN 1092-2 PN16.
– Holes dimensions according to UNE-EN 1092-2 PN10 / PN 16.
– Working conditions NBR: From -1 to +16 bar, from -10 to +80 ºC.
– Working conditions EPDM: From -1 to +16 bar, from -10 to +100 ºC.
Gate Valve With NBR/EPDM Rubber Lined Wedge Fig. 51
– EN-1171.
– Face to face dimensions according to EN 558-1 Serie 14. DIN 3202 / F4.
– Flanges dimensions according to UNE-EN 1092-2 PN16.
– Holes dimensions according to UNE-EN 1092-2 PN10 / PN 16.
– Internal and external “ EPOXY “ coating RAL 5017.
– Working conditions NBR: From -1 to +16 bar, from -10 to +80 ºC.
– Working conditions EPDM: From -1 to +16 bar, from -10 to +100 ºC.
Gate Valve With NBR/EPDM Rubber Lined Wedge Fig. 52
– EN-1071.
– Face to face dimensions according to EN 558-1 Serie 15. DIN 3202 / F5.
– Flanges dimensions and holes according to UNE-EN 1092-2 PN25.
– Working conditions NBR: From -1 to +25 bar, from -10 to +80 ºC.
– Working conditions EPDM: From -1 to +25 bar, from -10 to +100 ºC.
Threaded Ends Gate Valve With Rubber Lined Wedge Fig. 53
– EN-1171.
– Threaded ends according to DIN 259 / 2999.
– Working conditions EPDM: From -1 to +16 bar, from -10 to +100 ºC
Resilient Seated Gate Valve With NBR/EPDM Rubber Lined Wedge Fig. 55
– EN-1171.
– Face to face dimensions according to EN 558-1 Serie 15. DIN 3202 / F5.
– Flanges dimensions and holes according to UNE-EN 1092-2 PN25.
– Internal and external “ EPOXY “ coating RAL 5017.
– Working conditions NBR: From -1 to +25 bar, from -10 to +80 ºC.
– Working conditions EPDM: From -1 to +25 bar, from -10 to +100 ºC.
Disk Check Valve Fig. 19
– According to EN-12334.
– Valve for mounting between flanges according to UNE-EN 1092-2 PN10 / PN16.
– These valves from Ø100 to Ø400 are also suitable for mounting between flanges according to ANSI Class 150 lbs.
CHARACTERISTICS:
– Strong valve, reduced weight and dimension.
– It doesn’t need maintenance.
– For horizontal or vertical working position.
– Easy assembly between flanges.
Stainless Steel Double Disk Check Valve Fig. 37
– According to EN-12334.
– Face to face dimensions according to EN 558-1 Serie 16. API 609.
– Valve for mounting between flanges according to UNE-EN 1092-2 PN10 / PN16.
– These valves from Ø100 to Ø600 are also suitable for mounting between flanges according to ANSI Class 150 lbs.
CHARACTERISTICS:
– Double disk and seat design for optimum sealing.
– Springs with elongated and curved supports that offer a longer life.
– Minimal wear of the seat and disks.
– Excellent work in various mounting orientations.
– It has a low maintenance cost.
– Minimum weight and compact design, can reduce weight on the line.
– Ideal for installation in vertical pipes.
– It has an easy installation and removal.
– Eye bolt available between size Ø125 to Ø600 to facilitate the centering and
assembly of the valve.
PN25 Double Disk Check Valve Fig. 37
– According to EN-12334.
– Face to face dimensions according to EN 558-1 Serie 16. API 609.
– Valve for mounting between flanges according to UNE-EN 1092-2 PN25
CHARACTERISTICS:
– Double disk and seat design for optimum sealing.
– Springs with elongated and curved supports that offer a longer life.
– Minimal wear of the seat and disks.
– Excellent work in various mounting orientations.
– It has a low maintenance cost.
– Its minimum weight and compact design can reduce weight on the line.
– Ideal for installation in vertical pipes.
– It has an easy installation and removal.
– Eye bolt available between size Ø250 to Ø600 to facilitate the centering and
assembly of the valve.
Double Disk Check Valve Fig. 37
– According to EN-12334.
– Face to face dimensions according to EN 558-1 Serie 16. API 609.
– Valve for mounting between flanges according to UNE-EN 1092-2 PN10 / PN16.
– These valves from Ø100 to Ø600 are also suitable for mounting between flanges according to ANSI Class 150 lbs.
CHARACTERISTICS:
– Double disk and seat design for optimum sealing.
– Springs with elongated and curved supports that offer a longer life.
– Minimal wear of the seat and disks.
– Excellent work in various mounting orientations.
– It has a low maintenance cost.
– Minimum weight and compact design, can reduce weight on the line.
– Ideal for installation in vertical pipes.
– It has an easy installation and removal.
– Eye bolt available between size Ø125 to Ø600 to facilitate the centering and assembly of the valve.
Flanged “Y” Type Strainer (450 – 700) Fig. 42
– Face to face dimensions according to EN 558-1 Serie 1. DIN 3202-1 / F1.
– Flanges dimensions according to UNE-EN 1092-2 PN16 (From Ø15 to Ø400).
– Flanges dimensions accord. to UNE-EN 1092-2 PN10 or PN16 (From Ø.
OPTIONS:
– Body-bonnet gasket in rubber, carton or graphite.
– Available in any screen perforation.
– Plugs before and after the screen for checking drop pressure
Threaded Ends “Y” Type Strainer Fig 43
Threaded ends according to: DIN 259 / 2999.
OPTIONS:
– Bosy-bonnet gasket in rubber, carton or graphite.
– Available in any screen perforation.
– Plugs before and after the screen for checking drop pressure.
