Waste water
Threaded Ends Ball Check Valve Fig. 44
– EN-12334.
– Threaded ends according to DIN 259 / 2999.
– Internal and external “ EPOXY “ coating RAL 5017.
Ball Check Valve Fig. 40
– According to EN-12334.
– Face to face dimensions according to EN 558-1 Serie 48.
– Flanges dimensions and holes according to UNE-EN 1092-2 PN10.
– Internal and external “EPOXY“ coating RAL 5017.
Dismantling Joint Fig. 80
– Flange dimensions and holes according to: DIN 2576 PN10, DIN 2502 PN16 and DIN 2503 PN25.
CHARACTERISTICS:
– The dismantling joint enables easy installation and dismantling of isolating valves, not return valves, low metering equipment, pumps etc.
– Flanges and tubes with Epoxy coating.
– Threaded rod and nuts are not included in the dismantling joint, it is an option.
– Working conditions NBR: From -1 to 16 bar, from -10 to 80 ºC.
Wafer Type Knife Gate Valve Fig. 57
Joining between flanges according to UNE-EN 1092-2 PN10 or ANSI B16.5 ASA 150 lbs.
Characteristics:
– Monobloc body.
– Full bore: allows a high flow with low head loss.
OPTIONS:
– With handwheel and
metal seal.
– With handwheel and
EPDM or NBR seal.
– With double acting
Pneumatic actuator
and metal seal.
– With double acting
pneumatic actuator
and EPDM or NBR
seal.
– Others…
