Showing 1–12 of 14 results
Water pipes for irrigation
Sort by
Product Category
Maximum Temperature
Product Category
Ductile “Y” type filter with Flanges PN25 Fig.42N
– Mounting length according to EN 558-1 Serie 1. DIN 3202-1 / F1.
– Flange dimensions according to UNE-EN 1092-2 PN25.
– Hole dimensions according to UNE-EN 1092-2 PN25.
OPTIONS:
– Body-lid joint in rubber, cardboard or graphite.
– Different mesh microns in sieve.
– Plugs before and after the sieve to check pressure drop.
Flanged “Y” Type Strainer (15-400) Fig. 42
– Face to face dimensions according to EN 558-1 Serie 1. DIN 3202-1 / F1.
– Flanges dimensions according to UNE-EN 1092-2 PN16 (From Ø15 to Ø400).
– Flanges dimensions accord. to UNE-EN 1092-2 PN10 or PN16 (From Ø450 to Ø700).
– Holes dimensions according to UNE-EN 1092-2 PN10 / PN16.
OPTIONS:
– Body-bonnet gasket in rubber, carton or graphite.
– Available in any screen perforation.
– Plugs before and after the screen for checking drop pressure.
Flanged “Y” Type Strainer (450 – 700) Fig. 42
– Face to face dimensions according to EN 558-1 Serie 1. DIN 3202-1 / F1.
– Flanges dimensions according to UNE-EN 1092-2 PN16 (From Ø15 to Ø400).
– Flanges dimensions accord. to UNE-EN 1092-2 PN10 or PN16 (From Ø.
OPTIONS:
– Body-bonnet gasket in rubber, carton or graphite.
– Available in any screen perforation.
– Plugs before and after the screen for checking drop pressure
Gate Valve With EPDM Rubber Lined Wedge Fig. 59
– EN-1074.
– Face to face dimensions according to EN 558-1 Serie 14. DIN 3202 / F4.
– Flanges dimensions according to UNE-EN 1092-2 PN16.
– Holes dimensions according to UNE-EN 1092-2 PN10 / PN 16.
– Internal and external “ EPOXY “ coating RAL 5017.
– Working conditions EPDM: From -1 to +16 bar, from -10 to +85 ºC.
Gate Valve With NBR/EPDM Rubber Lined Wedge Fig. 50
– EN-1071.
– Face to face dimensions according to EN 558-1 Serie 14. DIN 3202 / F4.
– Flanges dimensions according to UNE-EN 1092-2 PN16.
– Holes dimensions according to UNE-EN 1092-2 PN10 / PN 16.
– Working conditions NBR: From -1 to +16 bar, from -10 to +80 ºC.
– Working conditions EPDM: From -1 to +16 bar, from -10 to +100 ºC.
Gate Valve With NBR/EPDM Rubber Lined Wedge Fig. 51
– EN-1171.
– Face to face dimensions according to EN 558-1 Serie 14. DIN 3202 / F4.
– Flanges dimensions according to UNE-EN 1092-2 PN16.
– Holes dimensions according to UNE-EN 1092-2 PN10 / PN 16.
– Internal and external “ EPOXY “ coating RAL 5017.
– Working conditions NBR: From -1 to +16 bar, from -10 to +80 ºC.
– Working conditions EPDM: From -1 to +16 bar, from -10 to +100 ºC.
Gate Valve With NBR/EPDM Rubber Lined Wedge Fig. 52
– EN-1071.
– Face to face dimensions according to EN 558-1 Serie 15. DIN 3202 / F5.
– Flanges dimensions and holes according to UNE-EN 1092-2 PN25.
– Working conditions NBR: From -1 to +25 bar, from -10 to +80 ºC.
– Working conditions EPDM: From -1 to +25 bar, from -10 to +100 ºC.
Resilient Seated Gate Valve With NBR/EPDM Rubber Lined Wedge Fig. 48
– EN-1171
– Face to face dimensions according to EN 558-1 Serie 3. ANSI B16.10.
– Threaded ends according to ISO 6182 and ANSI/AWWA C606.
– Working conditions NBR: From -1 to +16 bar, from -10 to +80 ºC.
– Working conditions EPDM: From -1 to +16 bar, from -10 to +100 ºC.
Resilient Seated Gate Valve With NBR/EPDM Rubber Lined Wedge Fig. 55
– EN-1171.
– Face to face dimensions according to EN 558-1 Serie 15. DIN 3202 / F5.
– Flanges dimensions and holes according to UNE-EN 1092-2 PN25.
– Internal and external “ EPOXY “ coating RAL 5017.
– Working conditions NBR: From -1 to +25 bar, from -10 to +80 ºC.
– Working conditions EPDM: From -1 to +25 bar, from -10 to +100 ºC.
Resilient Seated Gate Valve With NBR/EPDM Rubber Lined Wedge Fig. 58
– EN-1171.
– Face to face dimensions according to EN 558-1 Serie 3. ANSI B16.10.
– Threaded ends according to ISO 6182 and ANSI/AWWA C606.
– Internal and external “ EPOXY “ coating RAL 3002.
– Working conditions NBR: From -1 to +16 bar, from -10 to +80 ºC.
– Working conditions EPDM: From -1 to +16 bar, from -10 to +100 ºC
Threaded Ends “Y” Type Strainer Fig 43
Threaded ends according to: DIN 259 / 2999.
OPTIONS:
– Bosy-bonnet gasket in rubber, carton or graphite.
– Available in any screen perforation.
– Plugs before and after the screen for checking drop pressure.