Novelties
Ductile Flanged Axial Check Valve PN25 Fig.39N
– Flange dimension according to UNE-EN 1092-2 PN25.
– Holes according to UNE-EN 1092-2 PN25.
Characteristics:
–Axial disc check valve for protection and non-return of clean water.– The valve is installed both horizontal and vertical pipes.
– Silent operations.
– Easy maintenance.
– Temperature NBR: De -10 a +80 ºC.
– Leak rate according to EN 12266 (ISO 5208).
Ductile “Y” type filter with Flanges PN25 Fig.42N
– Mounting length according to EN 558-1 Serie 1. DIN 3202-1 / F1.
– Flange dimensions according to UNE-EN 1092-2 PN25.
– Hole dimensions according to UNE-EN 1092-2 PN25.
OPTIONS:
– Body-lid joint in rubber, cardboard or graphite.
– Different mesh microns in sieve.
– Plugs before and after the sieve to check pressure drop.
Axial Check Valve With Flanges Fig. 39
– Flanges dimensions according to UNE-EN 1092-2 PN16.
– Holes dimensions according to UNE-EN 1092-2 PN10 / PN16.
CHARACTERISTICS:
– Axial check valve for protection and non-return for clean water.
– The valve will be installed in horizontal or vertical pipelines.
– Silent operation.
– Easy maintenance.
– NBR temperature: From -10 to +80 ºC.
– Leakage rate according to EN 12266 (ISO 5208).
Stainless Steel Ball Valve With Flanges Fig. 65I
– EN-12516 (DIN 3357).
– Face to face dimensions according to EN 558-1 Serie 27.
DIN 3202 F4 (From DN40 to DN100).
DIN 3202 F5 (From DN125 to DN200).
– Flanges dimensions and holes according to UNE-EN 1092-2 PN10/16.
CHARACTERISTICS:
It is recommended:
– For driving and cutting service, without strangulation.
– When you need quick opening.
– Working pressure: From 16 to 40 bar.
– Working temperature: From -25º to 180 ºC.
– When you need minimal resistance to movement.
Advantages:
– Low cost.
– It cleans by itself.
– Low maintenance.
– Does not require lubrication.
– Compact size.
Ball Valve With Flanges Din 3357 Fig. 65B
– Face to face dimensions according to EN 558-1 Serie 27.
– Flanges dimensions and holes according UNE-EN 1092-2 PN16.
CHARACTERISTICS:
It is recommended:
– For driving and cutting service, without strangulation.
– When you need quick opening.
– For temperatures: From -10º to 200 ºC.
– When you need minimal resistance to movement.
Advantages:
– Low cost.
– It cleans by itself.
– Low maintenance.
– Does not require lubrication.
– Compact size.
Metal Seated Gave Valve Fig. 34C
– According to EN-1171.
– Face to face dimensions according to EN 558-1 Serie 14. DIN 3202 / F4.
– Flanges dimensions according to UNE-EN 1092-2 PN16.
– Holes dimensions according to UNE-EN 1092-2 PN10 / PN 16.
Gate Valve With EPDM Rubber Lined Wedge Fig. 59
– EN-1074.
– Face to face dimensions according to EN 558-1 Serie 14. DIN 3202 / F4.
– Flanges dimensions according to UNE-EN 1092-2 PN16.
– Holes dimensions according to UNE-EN 1092-2 PN10 / PN 16.
– Internal and external “ EPOXY “ coating RAL 5017.
– Working conditions EPDM: From -1 to +16 bar, from -10 to +85 ºC.
Grooved Ends Butterfly Valve With Tamper Switch Fig. 21 UL/FM
CHARACTERISTICS:
– UL / FM & VdS certificated.
– According to EN-593.
– Easy assembly.
– Low pressure drop and total tightness.
– Grooved ends according to: ISO 6182 and AWWA C606.
– Top flange according to ISO 5211.
– Working pressure: 16 bar.
– Internal and external epoxy coating.
– Maximum working temperature 80 ºC.