Various
Ductile “Y” type filter with Flanges PN25 Fig.42N
– Mounting length according to EN 558-1 Serie 1. DIN 3202-1 / F1.
– Flange dimensions according to UNE-EN 1092-2 PN25.
– Hole dimensions according to UNE-EN 1092-2 PN25.
OPTIONS:
– Body-lid joint in rubber, cardboard or graphite.
– Different mesh microns in sieve.
– Plugs before and after the sieve to check pressure drop.
Bridge Valve Fig. 30
VARIATIONS:
BRIDGE VALVE FIG.30:
It is the same valve FIG.15 except
the interchangeable bridge.-nut.
SPECIALS CONSTRUCTIONS:
On demand the valves could manufactured:
– For superior’s diameters.
– In other types of materials.
– With operating handle.
– With suction cup for air outlet.
– Others…
Bridge Valve Fig. 45
VARIATIONS:
BRIDGE VALVE FIG.45:
It is the same valve FIG.15 except
the flange-base drilling according UNE-EN 1092-2 PN-10.
SPECIALS CONSTRUCTIONS:
On demand the valves could manufactured:
– For superior’s diameters.
– In other types of materials.
– With operating handle.
– With suction cup for air outlet.
– Others…
Bridge Valve Fig. 15
SPECIALS CONSTRUCTIONS:
On demand the valves could manufactured:
– For superior’s diameters.
– In other types of materials.
– With operating handle.
– With suction cup for air outlet.
– Others…
Handle for bridge valves:
– Material: Cast iron EN-GJL-250 (GG-25).
– Weight: 700 gr.
Flanged “Y” Type Strainer (15-400) Fig. 42
– Face to face dimensions according to EN 558-1 Serie 1. DIN 3202-1 / F1.
– Flanges dimensions according to UNE-EN 1092-2 PN16 (From Ø15 to Ø400).
– Flanges dimensions accord. to UNE-EN 1092-2 PN10 or PN16 (From Ø450 to Ø700).
– Holes dimensions according to UNE-EN 1092-2 PN10 / PN16.
OPTIONS:
– Body-bonnet gasket in rubber, carton or graphite.
– Available in any screen perforation.
– Plugs before and after the screen for checking drop pressure.
Wafer Type Knife Gate Valve Fig. 57
Joining between flanges according to UNE-EN 1092-2 PN10 or ANSI B16.5 ASA 150 lbs.
Characteristics:
– Monobloc body.
– Full bore: allows a high flow with low head loss.
OPTIONS:
– With handwheel and
metal seal.
– With handwheel and
EPDM or NBR seal.
– With double acting
Pneumatic actuator
and metal seal.
– With double acting
pneumatic actuator
and EPDM or NBR
seal.
– Others…
Lug Type Knife Gate Valve Fig. 57 LUG
Joining between flanges according to UNE-EN 1092-2 PN10 or ANSI B16.5 ASA 150 lbs.
Characteristics:
– Monobloc body.
– Full bore: allows a high flow with low head loss.
Ductile Valve Fig. 45N
– Flange dimensions and holes according UNE-EN 1092-1 PN10 / PN16.
SPECIALS CONSTRUCTIONS:
On demand the valves could manufactured:
– With extension spindle and handwheel.
– With extension spindle and electric actuator.
– With extension spindle and gear-box.
– Others…
Threaded Ends “Y” Type Strainer Fig 43
Threaded ends according to: DIN 259 / 2999.
OPTIONS:
– Bosy-bonnet gasket in rubber, carton or graphite.
– Available in any screen perforation.
– Plugs before and after the screen for checking drop pressure.
